Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

Reverse Osmosis Controller – OS3050/51

You are here : Home | Spares & Parts | Controllers | Reverse Osmosis Controllers | OS3050/51


Reverse Osmosis Controllers – OS3050/51

 

MODEL SELECTION
OS3015OS3020
OS3030OS3050/51
RGS3000RGS8000

 

Reverse Osmosis Controller – OS3050/51


Reverse Osmosis Controller – OS3050/1 (1 conductivity meter, man. Temp. Comp. 7 inputs and 7 outputs).
ModelPower in / out
OS3050/124/24, 115/115 or 230/230 VAC
Reverse Osmosis Controller – OS3050/2 (1 conductivity meter, man. Temp. Comp. 7 inputs and 7 outputs).
OS3050/224/24, 115/115 or 230/230 VAC
Reverse Osmosis Controller – OS3050/1/l (as OS3050/1 and including 2 recorder outputs ).
OS3050/1/124/24, 115/115 or 230/230 VAC
Reverse Osmosis Controller – OS3050/2/l (as OS3050/2 and including 2 recorder outputs ).
OS3050/2/l24/24, 115/115 or 230/230 VAC
Reverse Osmosis Controller – OS3051/1 (1 conductivity meter, man. Temp. Comp. 7 inputs and 7 outputs).
OS3051/124/24, 115/115 or 230/230 VAC
Reverse Osmosis Controller – OS3051/2 (2 conductivity meter, aut. Temp. Comp. 7 inputs and 7 outputs).
OS3051/224/24, 115/115 or 230/230 VAC
Reverse Osmosis Controller – OS3051/1/1 (As OS3051/1 and including 2 recorder outputs).
OS3051/1/124/24, 115/115 or 230/230 VAC
Reverse Osmosis Controller – OS3051/2/l (As OS3051/2 and including 2 recorder outputs).
OS3051/2/l24/24, 115/115 or 230/230 VAC
ImageNamePrice Inc VATBuy

Description

OS3050 Reverse Osmosis ControllerThe unit type OS3050 or type OS3051 is universal applicable for automatic monitoring and control of reverse osmosis plants. The controller is equipped with a conductivity meter optional is a second conductivity meter and temperature meter. Also optional is a circuit board with two recorder outputs (0(4) – 20 mA). There are five possible stages : “Stand by”, “Production”, “Rinse after production”, “Rinse during standby” and “Maintenance”. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.

Features

  • Menu driven programming utilising “two line” LCD-display
  • Choice of languages (English, French, German, Italian, Spanish or Dutch)
  • Adaptable to user specific requirements by built-in programmable options.
  • Simple control utilising easy to follow symbols.
  • Universally applicable for various sizes of installation
  • Desalinated water production controllable by hand or level switches
  • Control of the maintenance situation by means of a code choice possible
  • Programming a service telephone number possible
  • Substantial status information employing INFO key: actual input and output conditions, service telephone number, software version, programming situation of the annunciation and malfunction relays, rinse interval, rinse times, instrument probe cell constants
  • Large green LED-display showing permeate- and raw water conductivity plus the relative
  • Permeate-conductivity as a percentage value of the raw water conductivity or raw water temperature
  • Optional card for 2 recorder outputs 0(4)-20mA (conductivity / temperature)
  • Input: production-stop, storage tank full/empty, excess pressure, low pressure, concentrate-monitoring or alarm reset, motor protection switch, temperature feeler (optional)
  • Integrated conductivity meter with automatic range switching
  • Conductivity range according to the instrument probe cell constants from 0,1 to 1 00 000 µS/cm
  • The instrument probe cell constants programmable from 0,01 to 10,00 cm-1
  • Manual or automatic temperature compensation
  • Duplicate conductivity meter and temperature reading as an available option
  • Thermo switch with annunciation contact for 115/230 Volt pressure pump as available option Output: pressure pump (protection), input valve, rinse valve for concentrate and permeate, annunciation and malfunction contact
  • Security of program information against supply failure, as all program information is stored without accu
  • Large capacity microprocessor with “Watchdog”, illegal “Operation code” and frequency monitoring
  • Manufactured in accordance with EMC codes of practice; by means of galvanic isolation between the micro-processor and the in- and output circuits, plus extra built-in filter
  • Available for wall-mounting and panel-mounting
  • Available (input /output) : 24/24V, 115/115V, 230/230V

Back