WATER FILTER / SOFTENER CONTROLLERS

HOME | CONTROLLERS | WATER FILTER / SOFTENER CONTROLLERS

water filter & softener controller ES2030CV

The unit type ES2030CV is universal applicable for automatic monitoring and control of softener plants and suitable for single and double column installations in alternating, parallel or serial circuits. Universally implementable for a wide range of control valves and pilot valves. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.

  • User operated programming using double row of illuminated LCD display
  • Display text in English, French, German, Italian, Spanish or Dutch.
  • Simple control utilising easy to follow symbols.
  • Built-in audio signal for 7 programmed signal indicators.
  • Adaption to user specific requirements by means of options programmable on site.
  • Simple operation by means of a few clear operating symbols.
  • Can be used for various sizes of plant.
  • Capacity values programmable from 1 to 65535 m3 E or from 0.01 to 9999.99 m3.
  • Regeneration/rinsing activation by time interval, flow, external switching, real time clock or manual control.
  • Time delayed regeneration/rinsing.
  • Control of quantity dependent flushing.
  • Extensive status report facility using information button. Flush control, regeneration/rinsing time, extra program, filter capacity, total quantity of treated water, current input and outputs status, software version, start time interval, time delayed regeneration/rinsing, service telephone number, input and output programming.
  • Input of service telephone number.
  • 1 programmable input: water meter, regeneration/rinsing stop, regeneration/rinsing start or regeneration/rinsing agent monitoring.
  • 1 optional programmable input (IF circuit board) for water meter, regeneration/rinsing stop, regeneration/rinsing start or regeneration/rinsing agent monitoring.
  • Inputs programmable active open or closed.
  • 2 optional programmable outputs: extra program, regeneration/rinsing procedure, take-off impulse, signalling or flushing. Output relay programmable active under current or not under current.
  • Secure from power failure as all data is stored long-term without battery.
  • Real time clock with battery back-up.
  • SD Card holder for software updates.
  • Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
  • Safeguarded from EMC by galvanic separation between micro controller and in- and output circuits and also by additional interference suppression filter.
  • Available for wall-mounting.
  • Available (input /output) : 24/24VAC, 115/115VAC, 230/230VAC, 115/24VAC, 230/24VAC
ES2030CV user manual

water filter & softener controller ES2030SV

The unit type ES2030SV is universal applicable for automatic monitoring and control of softener or filtering plants (through solenoid valves) and suitable for single and double column installations in alternating, parallel or serial circuits. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.

  • User operated programming using double row of illuminated LCD display.
  • Display text in English, French, German, Italian, Spanish or Dutch.
  • Simple control utilizing easy to follow symbols.
  • Built-in audio signal for 7 programmed signal indicators.
  • Adaption to user specific requirements by means of options programmable on site.
  • Simple operation by means of a few clear operating symbols.
  • Can be used for various sizes of plant.
  • Capacity values programmable from 1 to 65535 m3 E or from 0.01 to 9999.99 m3.
  • Regeneration/rinsing activation by time interval, flow, external switching, real time clock or manual control.
  • Time delayed regeneration/rinsing.
  • Control of quantity dependent flushing.
  • Extensive status report facility using information button. Flush control, regeneration/rinsing time, extra program, filter capacity, total quantity of treated water, current input and outputs status, software version, start time interval, time delayed regeneration/rinsing, service telephone number, input and output programming.
  • Input of service telephone number.
  • 1 programmable input: water meter, regeneration/rinsing stop, regeneration/rinsing start or regeneration/rinsing agent monitoring.
  • 1 optional programmable input (IF circuit board) for water meter, regeneration/rinsing stop, regeneration/rinsing start or regeneration/rinsing agent monitoring.
  • Inputs programmable active open or closed.
  • 2 optional programmable outputs: extra program, regeneration/rinsing procedure, take-off impulse, signalling or flushing. Output relay programmable active under current or not under current.
  • Secure from power failure as all data is stored long-term without battery.
  • Real time clock with battery back-up.
  • SD Card holder for software updates.
  • Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
  • Safeguarded from EMC by galvanic separation between microcontroller and in- and output circuits and also by additional interference suppression filter.
  • Available for wall-mounting.
  • Available (input /output) : 24/24VAC, 115/115VAC, 230/230VAC, 115/24VAC, 230/24VAC
ES2030SV user manual

water filter & softener controller ES2050/51

The unit type ES2050 is universal applicable for automatic monitoring and control of softener plants and suitable for single and double column installations in alternating and parallel circuits. Universally implementable for a wide range of control valves and pilot valves. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.

  • User operated programming using double row of illuminated LCD display.
  • Display text in English, French, German, Italian, Spanish or Dutch.
  • Simple control utilising easy to follow symbols.
  • Adaption to user specific requirements by means of options programmable on site.
  • Simple operation by means of a few clear operating symbols.
  • Can be used for various sizes of plant.
  • Capacity values programmable from 1 to 65535 m3
  • Regeneration/rinsing activation by time interval, flow, external switching, real time clock or manual control.
  • Time delayed regeneration/rinsing.
  • Control of quantity dependent flushing.
  • Extensive status report facility using information button. Flush control, regeneration/rinsing time, extra program, filter capacity, total quantity of treated water, current input and outputs status, software version, start time interval, time delayed regeneration/rinsing, service telephone number, input and output programming.
  • Large green LED-display showing remaining capacity or remaining interval time until next regeneration/rinse.
  • Input of service telephone number.
  • 4 inputs: water meter, regeneration/rinsing agent monitoring, regeneration/rinsing stop or level switch for storage tank, regeneration/rinsing start.
  • 6 powered relay outputs: 2 control valves, 2 home switches and 2 service valves
  • 5 relay outputs (dry contact): extra program, regeneration/rinsing procedure, take-off impulse, signalling and flushing.
  • Secure from power failure as all data is stored long-term without battery.
  • Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
  • Safeguarded from EMC by galvanic separation between microcontroller and in- and output circuits and also by additional interference suppression filter.
  • Available for wall-mounting (ES2050) and panel mounting (ES2051).
  • Available (input /output) : 24/24VAC, 115/115VAC, 230/230VAC, 115/24VAC, 230/24VAC, 240/24VAC
ES2050/51 user manual

water filter & softener controller ES2070SV

The unit type ES2070SV is universal applicable for automatic monitoring and control of softener or filtering plants (through solenoid valves) and suitable for single and double column installations in alternating or parallel circuits. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power

  • User operated programming using double row of illuminated LCD display.
  • Display text in English, French, German, Italian, Dutch or Lithuanian.
  • Simple control utilising easy to follow symbols.
  • Adaption to user specific requirements by means of options programmable on site.
  • Simple operation by means of a few clear operating symbols.
  • Can be used for various sizes of plant.
  • Capacity values programmable from 1 to 65535 m3
  • Regeneration/rinsing activation by time interval, flow, external switching, real time clock or manual control.
  • Time delayed regeneration/rinsing.
  • Control of quantity dependent flushing.
  • Extensive status report facility using information button. Flush control, regeneration/rinsing time, extra program, filter capacity, total quantity of treated water, current input and outputs status, software version, start time interval, time delayed regeneration/rinsing, service telephone number, input and output programming.
  • Large green LED-display showing remaining capacity or remaining interval time until next regeneration/rinse.
  • Input of service telephone number.
  • 6 inputs: water meter for each filter, regeneration/rinsing agent monitoring, regeneration/rinsing stop, level switch for storage tank, regeneration/rinsing start.
  • 9 powered relay outputs for solenoid valves
  • 6 relay outputs (dry contact): solenoid valves, extra programs, regeneration/rinsing procedure, take-off impulse, signalling and flushing.
  • Secure from power failure as all data is stored long-term without battery.
  • Real time clock with “lifetime” battery.
  • Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
  • Safeguarded from EMC by galvanic separation between micro controller and in- and output circuits and also by additional interference suppression filter.
  • Available for wall-mounting.
  • Available (input /output) : 24/24VAC, 115/115VAC, 230/230VAC, 115/24VAC, 230/24VAC, 240/24VAC
ES2070SV user manual

water filter & softener controller ES2070TV

The unit type ES2070TV is universal applicable for automatic monitoring and control of softener plants and suitable for single, double and triple column installations in alternating and parallel circuits. Universally implementable for a wide range of control valves and pilot valves. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.

  • User operated programming using double row of illuminated LCD display.
  • Display text in English, French, German, Italian, Spanish or Dutch.
  • Simple control utilising easy to follow symbols.
  • Adaption to user specific requirements by means of options programmable on site.
  • Simple operation by means of a few clear operating symbols.
  • Can be used for various sizes of plant.
  • Capacity values programmable from 1 to 65535 m3
  • Regeneration/rinsing activation by time interval, flow, external switching, real time clock or manual control.
  • Time delayed regeneration/rinsing
  • Control of quantity dependent flushing.
  • Extensive status report facility using information button. Flush control, regeneration/rinsing time, extra program, filter capacity, total quantity of treated water, current input and outputs status, software version, start time interval, time delayed regeneration/rinsing, service telephone number, input and output programming.
  • Large green LED-display showing remaining capacity or remaining interval time until next regeneration/rinse.
  • Input of service telephone number.
  • 6 inputs: water meter for each filter, regeneration/rinsing agent monitoring, regeneration/rinsing stop or level switch for storage tank, regeneration/rinsing start.
  • 9 powered relay outputs: 3 control valves, 3 home switches and 3 service valves
  • 6 relay outputs (dry contact): extra programs, regeneration/rinsing procedure, take-off impulse, signalling and flushing.
  • Secure from power failure as all data is stored long-term without battery.
  • Real time clock with “lifetime” battery.
  • Efficient micro controller with watchdog, illegal operation code and cycle monitoring.
  • Safeguarded from EMC by galvanic separation between micro controller and in- and output circuits and also by additional interference suppression filter.
  • Available for wall-mounting.
  • Available (input /output) : 24/24VAC, 115/115VAC, 230/230VAC, 115/24VAC, 230/24VAC, 240/24VAC
ES2070TV user manual

Need Help?

We can advise on the correct controller for your application, please contact our sales department on :

01629 363311

We are more than happy to help.