You are here : Home | Products & Systems | Water Recycling | Rainwater Harvesting & Reuse | Filters | Garden Filter

Rainwater Harvesting – Pre Tank Filters  – Garden Filter

 

GARDEN FILTER
Garden Filter Accessories
How it WorksDimensions
Technical Data

 

[product_table search_box=”false” totals=”false” page_length=”false” reset_button=”false” columns=”name,price:Price Inc VAT,add-to-cart” show_quantity=”true” category=”pre-tank-garden-filter”]

Garden Filter

Rainwater Harvesting Filter - Garden FilterThe 3P Garden Filter with plastic shaft extension tube is for direct installation in the ground before the rainwater tank, with locking lid.

The extension tube is telescopic, so it can be cut to the correct height. It is simple to use and install. The extension is correctly fitted when the bayonet locking system which clicks into place.

This filter is very suitable for equipments of watering the garden and for sites in which the rainwater has to be drained off. (when no connection with a sewer is possible)

All inlets and outlets are at DN 100 (110mm OD), one inlet can also be used as an emergency overflow.

The cleaned rainwater is led through the bottom connection into the rainwater tank. A calmed inlet can be installed there.

Connection capacity for roof areas up to 200 m².

The cleaned water can be used for garden watering.

The filter has to be cleaned depending on the contamination several times during the year.

[/two_third_last]