Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

Chloride

You are here : Home | Spares & Parts | Water Testing Equipment Water Testing Instruments | Single Parameter Checkers | Chloride


Single Parameter Check – Chloride

  • Chloride CheckHandheld Colorimeter
  • Easier to use and more accurate than chemical test kits
  • Dedicated to a single parameter
  • Small size, big convenience

Ideal for

  • Drinking water
  • Waste water
  • Boiler and cooling towers

The HI753 Checker®HC is a simple, accurate, and cost effective way to measure chloride. Designed as a more accurate alternative to chemical test kits, the HI753 provides quick, accurate results in three easy steps.

Step One – Prepare samples according to the manual.

Step Two – Insert zero cuvette into the Checker®HC, press and hold the button for 3 seconds to start reaction timer. Meter will zero automatically.

Step Three – Remove zero cuvette and insert sample. Press the button to measure your results.

The HI753 uses an adaptation of the mercury(II) thiocyanate method

CodeRangeDescriptionPrice
HI7530.0 to 20.0 ppmHI753 Checker®HC is supplied with sample cuvettes with caps (2), chloride reagent starter kit (reagents for 25 tests), syringes with tips (2), battery, instructions and quick start guide£60.00Buy Now

Replacement Reagents

Replacement Reagents

CodeDescriptionPrice
HI-753-25Reagents for HI753 Chloride Checker£25.10Buy Now

Specifications
HI753
Range0.0 to 20.0 ppm
Resolution0.1 ppm
Accuracy @ 25°C/77°F± 0.5 ppm ± 6% of reading
Light SourceLED @ 470 nm
Light Detectorsilicon photocell
Environment0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type(1) 1.5V AAA
Auto-offafter ten minutes of non-use
Dimensions81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)
Weight64 g (2.25 oz.)
Methodadaptation of the mercury(II) thiocyanate method

Back