Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories
Contact Phone Number and Email Address

Water Leak Detection – High Level Alarm

You are here : Home | Products & Systems | Water Leak Detection Equipment | High Level Alarm

Leak Detection Units - High Level Alarm

Water Leak Detection - High Level Alarm Schematic


Nice simple to install high level alarm panel designed to alert to high fluid levels in tanks when connected to a float switch.  The panel has an inbuilt sounder and a LED to show that an alarm has occurred.

This alarm panel can also be used to monitor air pressure loss using a pressure switch installed in the feed tube from the compressor.

Once in alarm the sounder can be muted with the press of a button.

There is also a useful TEST button that can be used to periodically ensure that the panel is functioning correctly.

The High Level Alarm can have a number of external devices attached.  There is an external beacon, sounder and beacon/sounder that connects to the High Level Alarm for when the panel on it’s own may not be seen or heard.

Simple low cost alarm for high level monitoring
Connects to standard float switches
Can be used for pressure loss monitoring
Output for connecting to external devices
Float switches available
Pressure switches available
Optional battery backup
Can be used with external beacons and sounders

Optional Extras

Sends a text message to up to 512 numbers when a panel goes into alarm.  Ideal for using where the main control panel is in an area that is unmanned or there is no out of hours personnel.
A range of external sounder and beacon panels to suit every need.  Designed to work with any Alarm panel to offer remote alarm signalling.  Great for areas where the audio/visual output on the main panel may not be seen or heard.