Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories
Contact Phone Number and Email Address

SIata Simplex – pH Correction

You are here : Home | Products & Systems | Water Filters | Siata | Siata Simplex | pH Correction

Siata Simplex – pH Correction


pH Correction Water Filters are commonly used for various different applications within industrial settings but can also be found in residential settings. pH correction is most commonly required when the water supply comes from a borehole or natural spring. Borehole water usually has a pH lower than the desired pH of 7 and can be as low as 6 pH. If left uncorrected, this can cause a multitude of problems with pipework, tanks, boilers and other water treatment equipment not to mention the effect it can have on your industrial production. Even a 0.1 increase or decrease in pH can greatly effect the quality of your water and depending on your application, could cost you dearly.


CodeVessel SizeMax Flow
S10SIF132SFEC10PH10" x 54"0.6 m3/hr flow
S10SIF132SFEC13PH13" x 54"1.1 m3/hr flow
S10SIF132SFEC14PH14" x 65"1.2 m3/hr flow
S10SIF132SFEC16PH16" x 65"1.5 m3/hr flow
S10SIF230SFEC18PH18" x 65"1.9 m3/hr flow
S10SIF250SFEC21PH21" x 60"2.6 m3/hr flow
S10SIF250SFEC24PH24" x 69"3.5 m3/hr flow
S10SIF250SFEC30PH30" x 78"5.4 m3/hr flow
S10SIF351SFEC36PH36" x 78"7.8 m3/hr flow
S10SIF363SFEC42PH42" x 78"10.7 m3/hr flow


ImageNamePrice Inc VATBuy