Clack pH Correction Water Filter – 3.27 m3/hr
£1,188.54 - £990.45 (exc. VAT)
Finance available on this product
If you are interested in financing your purchase please complete this short contact form.
To request a call back regarding this product please complete the form below.
Clack pH correction water filters are an important component of water treatment systems designed to adjust and maintain the pH level of water to meet specific requirements. pH, which measures the acidity or alkalinity of water, is a critical parameter in water quality management. Water with an improper pH level can lead to a range of issues, including corrosion of pipes and equipment, reduced effectiveness of disinfection processes, and potential health concerns.
IWE offer a range of Clack pH correction filters that are designed to address these issues effectively. These filters are widely used in various applications, including residential, commercial, and industrial settings.
Typically Juraperle is used with our vessels to treat issues with pH. Juraperle is ideal for situations where the initial incoming feed already has a pH level of approximately 6. It is important to also consider factors like iron and manganese content.
To maintain its effectiveness, Juraperle should be replenished annually. Our Juraperle pH systems come equipped with a backwashing valve, ensuring the media remains fresh and allowing for the removal of any suspended particles captured during service, thus preventing channeling.
Clack pH Correction Filters Key Information
| Ref | Description | Control Valve | Tank Size | *Media Volume | Flow Rate |
| J50-C1 | 0.74 m3/hr Juraperle WS1 System | Clack WS1 | 10” x 54” | 50 kgs | 0.74 m3/hr |
| J75-C1 | 1.07 m3/hr Juraperle WS1 System | Clack WS1 | 12” x 52” | 75 kgs | 1.07 m3/hr |
| J100-C1 | 1.26 m3/hr Juraperle WS1 System | Clack WS1 | 13” x 54” | 100 kgs | 1.26 m3/hr |
| J125-C1 | 1.46 m3/hr Juraperle WS1 System | Clack WS1 | 14” x 65” | 125 kgs | 1.46 m3/hr |
| J150-C1 | 1.90 m3/hr Juraperle WS1 System | Clack WS1 | 16” x 65” | 150 kgs | 1.90 m3/hr |
| J225-C1 | 2.41 m3/hr Juraperle WS1 System | Clack WS1 | 18” x 65” | 225 kgs | 2.41 m3/hr |
| J250-C1 | 3.27 m3/hr Juraperle WS1 System | Clack WS1 | 21” x 60” | 250 kgs | 3.27 m3/hr |
| J400-C1.5 | 4.28 m3/hr Juraperle WS1.5 System | Clack WS1.5 | 24” x 69” | 400 kgs | 4.28 m3/hr |
| J650-C2 | 6.69 m3/hr Juraperle WS2 System | Clack WS2 | 30” x 72” | 650 kgs | 6.69 m3/hr |
| J925-C2 | 9.63 m3/hr Juraperle WS2 System | Clack WS2 | 36” x 72” | 925 kgs | 9.63 m3/hr |
| *Juraperle comes in 25kgs bag with 16.6L per bag | |||||
| ** Service flow dependent on CO2 level | |||||
Clack pH Correction Filters Specification
| Ref | Description | Width | Depth | Height |
| J50-C1 | 0.74 m3/hr Juraperle WS1 System | 270 mm | 400 mm | 1600 mm |
| J75-C1 | 1.07 m3/hr Juraperle WS1 System | 320 mm | 400 mm | 1600 mm |
| J100-C1 | 1.26 m3/hr Juraperle WS1 System | 350 mm | 400 mm | 1600 mm |
| J125-C1 | 1.46 m3/hr Juraperle WS1 System | 370 mm | 400 mm | 1900 mm |
| J150-C1 | 1.90 m3/hr Juraperle WS1 System | 410 mm | 410 mm | 1900 mm |
| J225-C1 | 2.41 m3/hr Juraperle WS1 System | 510 mm | 510 mm | 2000 mm |
| J250-C1 | 3.27 m3/hr Juraperle WS1 System | 555 mm | 580 mm | 2200 mm |
| J400-C1.5 | 4.28 m3/hr Juraperle WS1.5 System | 610 mm | 650 mm | 2200 mm |
| J650-C2 | 6.69 m3/hr Juraperle WS2 System | 610 mm | 640 mm | 2200 mm |
| J925-C2 | 9.63 m3/hr Juraperle WS2 System | 770 mm | 770 mm | 2400 mm |
You may also like…
