You are here : Home | Products & Systems | Reverse Osmosis | Herco Range | Soft Water Feed | Series WS & W | W | W 50


Reverse Osmosis – Model W 50

Series W Reverse Osmosis Water Filter

Reverse Osmosis – Model W50

W Series: 50 – 400 l/h Wall mounting unit. For desalination of softened drinking water according to German drinking water regulations (free chlorine not detectable), operating on the principle of reverse osmosis. Drinking water can also be desalinated without pre-treatment. However, in this case the recovery rate is reduced. The decisive factor is the water analysis.

Stainless steel base frame with hinged plastic front panel housing the instruments and controls. Special inlet filter with 5 μm-filter cartridge, high pressure pump, rotary-vane type, high performance wound module with PA/PS composite membranes in GRP pressure vessel with inliner.

W 50 Technical Data
Permeate flow ratel/h50
Min. salt rejection%97
Operating pressurebar14
Membrane element / number2540 / 1
VoltageV/Hz230 / 50
Motor powerkW0.3
Feedwater connectionDN20
Permeate / concentrate connectionDN10
Conductivity rangeμS/cm1 – 99
Min. / max. feed water pressurebar2 / 6
Min. / max. feed water temp °C5 / 35
Max. ambient temperature°C40
pH3 – 11
Weight approxca. kg46
Code no380461