You are here : Home | Consumables | Reverse Osmosis Membranes | Hydranautics | ESNA
High performance nanofiltration membranes ideal for softening applications and the removal of pesticides, bacteria or viruses.
[su_spacer size=”30″]ESNA1 LF LD – 8″
| Permeate Flow | 8,200 gpd (31.0 m3/d) |
| Salt Rejection | 89% |
| Configuration | Low Fouling Spiral Wound |
| Membrane Polymer | Composite Polyamide |
| Membrane Active Area | 400 ft2 (37.1m2) |
| Maximum Applied Pressure | 600 psig (4.16 MPa) |
| Maximum Chlorine Concentration | <0.1 PPM |
| Maximum Operating Temperature | 113ºF (45ºC) |
| pH Range, Continuous (Cleaning) | 2-10 (1-12)* |
| Maximum Feedwater Turbidity | 1.0 NTU |
| Maximum Feedwater SDI (15 mins) | 5.0 |
| Maximum Feed Flow | 75 GPM (17.0 m3/h) |
| Minimum Ratio of concentrate to Permeate flow for any element | 5:1 |
| Maximum pressure drop for each element | 10 psi |
ESNA1 LF2 LD – 8″
| Permeate Flow | 10,500 gpd (39.7 m3/d) |
| Salt Rejection | 86% |
| Configuration | Low Fouling Spiral Wound |
| Membrane Polymer | Composite Polyamide |
| Membrane Active Area | 400 ft2 (37.1m2) |
| Maximum Applied Pressure | 600 psig (4.16 MPa) |
| Maximum Chlorine Concentration | <0.1 PPM |
| Maximum Operating Temperature | 113ºF (45ºC) |
| pH Range, Continuous (Cleaning) | 2-10 (1-12)* |
| Maximum Feedwater Turbidity | 1.0 NTU |
| Maximum Feedwater SDI (15 mins) | 4.0 |
| Maximum Feed Flow | 75 GPM (17.0 m3/h) |
| Minimum Ratio of concentrate to Permeate flow for any element | 5:1 |
| Maximum pressure drop for each element | 10 psi |