Reverse Osmosis RS Range

Reverse Osmosis Water Filter. Stainless steel base frame with plastic front panel housing the instruments and controls. Special inlet filter with 5 μm-filter cartridge and 2 pressure gauges, high pressure pump, rotary-vane type, high performance wound module with PA/PS composite membranes in GRP pressure vessel with inliner.

Valves and instruments including feed water sampling valve, solenoid inlet valve, feed water pressure switch, permeate and concentrate flow meter, vibration-resistant pressure gauges for pump and concentrate pressure, stainless steel valves for adjustment of permeate and concentrate flow rate and concentrate recirculation.

UO 50 RS Technical Data
Permeate flow ratel/h50
Min. salt rejection%97
Operating pressurebar14
Membrane element / number2540 / 1
Motor powerkW0.3
Feedwater connectionDN20
Permeate / concentrate connectionDN10
Conductivity rangeμS/cm1 – 200
Min. / max. feed water pressurebar2 / 6
Min. / max. feed water temperature°C5 / 35
Max. ambient temperature°C40
pH3 – 11
Weight approxca. kg50
Code noS10-380211

Reverse Osmosis RS & RSE

Stand Type unit with RO500 Controller (RS Systems), or RO1000 Controller (RSE Systems). For desalination of softened drinking water according to German drinking water regulations (free chlorine not detectable), operating on the principle of reverse osmosis.

Drinking water can also be desalinated without pre treatment. However, in this case the recovery rate is reduced. The decisive factor is the water analysis.

Need Help?

Unsure if reverse osmosis filtration is suitable for your requirements?

Contact our technical team for advice :

01629 55839

we are more than happy to help.