Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

HC 3 Series

You are here : Home | Spares & Parts | Pumps | AWS Dosing Pumps | Standard Dosing Pumps | HC 3 Series


AWS Dosing Pumps – HC 3 Series

HC 300

  • hc200Stroke Frequency control 0-100% or 0-20%
  • PTFE Diaphragm
  • On-Off dosing control
  • 2 Line LCD display
  • Analogue Controls
  • Lip Valves as standard
  • Double Ball valves on request
  • Dosing Head with integral priming valve
  • Wall mount or foot mount with bracket
  • Reinforced Plastic PP housing IP65
  • Optional Low level control with level switch

The HC300 is a solenoid driven dosing pump, diaphragm actuated, for standard duties where a constant dosing operation with a reliable performance is required. Designed for either continuous or intermittent operation, they are a reliable means of conveying strong chemicals under precise control into water treatment and process systems.They operate on the well proven principle of electromagnetic drive, with electronic frequency control. Their frequency (stroking speed) is adjustable in 2 speed ranges selectable via a two position switch which is also mounted on the facia.

PUMP CONTROL MODE
Constant mode: The pump flow rate is adjusted via a stroke frequency control knob and will constantly deliver according to the flow rate selected.

Switchable scale adjustment: for accurate control of low dosing volumes. Adjustment from 0 -100% or 0 – 20% Optional Level control: If fitted a level switch stops the pump when the chemical level runs low.


HC 301

  • Programmable Microprocessor with several control options
  • PTFE Diaphragm
  • Electronic Frequency control
  • PTFE Diaphragm
  • Touch Sensitive controls
  • Multifunction dosing modes
  • Digital keypad controls
  • Dosing Head with integral priming valve
  • Glass (Pyrex) Ball valves as standard
  • Double Ball valves on request
  • Wall mount or foot mount with bracket
  • Reinforced Plastic PP housing IP65
  • Low Level facility
  • Level probe on request

The HC301 is a multifunctional electronic solenoid driven dosing pump that has several electronic control options and incorporates an electronic frequency control. The pump features level control and switch. Available plastic support for horizontal mounting.

PUMP CONTROL
Digital controls: allow easy programming for both proportional and manual modes.

Programming modes

Manual mode: enables you to select the exact number of strokes, which can be used to prime the pump.

Pulse Multiplication mode: The pump will stroke in response to an external pulse. The pump control panel enables you to set the number of pulses the pump will stroke from a single pulse.

Pulse Division mode: The pump will stroke in response to external pulses. The impulse counter enables you to set the number of pulses received before the pump does 1 stroke.

Milliamp mode: The pump will stroke in response to an external Milliamp signal. The pump control panel enables you to spread the dosing pumps output across all or some of the milliamp signal. There are also 2 set points for creating your own dosing bandwidth.


 HC300 PH/RX

  • HC300 PRXBuilt-in pH- Rx instrument control options
  • pH range 0-14pH
  • Redox range +/- 0-1000mv
  • Electronic Frequency adjustment
  • PTFE Diaphragm
  • LCD display
  • Microprocessor based
  • Touch Sensitive controls
  • Glass (Pyrex) Ball valves as standard
  • Double Ball valves on request
  • Dosing Head with integral priming valve
  • Wall mount or foot mount with bracket
  • Reinforced Plastic PP housing IP65
  • Low Level facility
  • Level probe on request

The HC300 PH/RX electronic solenoid driven dosing pump has an integral pH/Redox controller with a single control set point which monitors the pH/Redox level of water. Its main purpose is to operate the pump if this level goes above or below the set point.

This set point can be adjusted and features a digital display of the value at any time. Connection to the electrode is made via a BNC connector. The pump is provided with a level facility and level switch. Also available is a plastic support bracket for horizontal mounting.

PUMP FUNCTIONS, DOSING MODES AND CONTROLS

Digital controls: allow easy programming for both pH & Redox settings.

Level control: If fitted a level switch stops the pump when the chemical level runs low.

Product CodeDescriptionPrice
HC 300 18230V PP-GL-VT on/off£278.76Buy Now
HC 300 30230V PVC-VL-VT on/off£410.46Buy Now
HC 300 50230V PVC-VL-VT on/off£410.46Buy Now
HC 301 18230V PP-GL-VT Multifunctional£460.50Buy Now
HC 301 30230V PVC-VL-VT Multifunctional£592.22Buy Now
HC 301 50230V PVC-VL-VT Multifunctional£592.22Buy Now
HC300 PH-RX18230V PP-GL-VT pH/rx/Orp proportional£526.87Buy Now
HC300 PH-RX30230V PVC-VL-VT pH/rx/Orp proportional£660.63Buy Now
HC300 PH-RX50230V PVC-VL-VT pH/rx/Orp proportional£660.63Buy Now

Back