Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

OneFlow Industrial Standard

You are here : Home | Products & Systems | Water Softeners | Salt Free Systems | Anti Scale Systems | Industrial Standard


OneFlow – Industrial Standard

OneFlow Industrial Anti-Scale System

ModelMaximum Flow Rate (Litres P/H)Connection Sizes
OF744-1022803⁄4", 1" or 11⁄4"
OF844-1227003⁄4", 1" or 11⁄4"
OF948-1636003⁄4", 1" or 11⁄4"
OF1054-2045603⁄4", 1" or 11⁄4"
OF1252-3068403⁄4", 1" or 11⁄4"
ImageNamePriceBuy
One Flow 2280 l/phOne Flow 2280 l/ph£420.00
420.00
One Flow 2700 l/phOne Flow 2700 l/ph£580.00
580.00
One Flow 3600 l/phOne Flow 3600 l/ph£600.00
600.00
One Flow 4560 l/phOne Flow 4560 l/ph£750.00
750.00
One Flow 6840 l/phOne Flow 6840 l/ph£1,100.00
1100.00

Features

  • Chemical free scale prevention and protection – converts hardness minerals to harmless, inactive microscopic crystals making OneFlow® effective alternative technology to a water softener for the prevention of scale due to water hardness
  • Virtually maintenance free – No salt bags or other chemicals to constantly add
  • No control valve, no electricity and no wastewater
  • Uses environmentally friendly “green” technology
  • Improves efficiency of all water using appliances – both hot* and cold
  • For hot water applications where water temperature is 110°F – 150°F (43°C – 66°C), please consult ES-OneFlow-HotWater
  • Simple sizing & installation – all you need to know is pipe size and the peak flow rate
  • Perfect system for towns or communities where water softeners are banned or restricted
  • OneFlow® does not remove minerals or add sodium to the water supply
  • OneFlow® can be installed as a pre-treatment to reverse osmosis (OneFlow® should be the last stage in treatment unless a point-of-use system is being used downstream.)

 

Feed Water Chemistry Requirements
pH6.5 to 8.5
Hardness (maximum)75 grains (1300 ppm CaCO3)
Water Pressure15psi to 100psi (103 kPa to 6.9 bar)
Temperature40°F to 110°F (5°C to 43°C)*
Chlorine< 3ppm
Iron (maximum)0.3 mg/l
Manganese (maximum)0.05 mg/l
CopperNone allowed
Oil & H2SNone allowed
PolyphosphateNone allowed
Silica (maximum)10 ppm

Note: Water known to have heavy loads of dirt and debris may require pre-filtration prior to OneFlow.

 

Back