Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

GMTX Metal Tube Flow Transmitters

GMTX Metal Tube Flow Transmitter

GMTX Flow MeterPlaton GMT metal tube flowmeters are magnetically coupled VA meters for liquids. Requiring no external power they are robustly constructed for heavy duty, with flanged connections on 1⁄2″ to 4″ line sizes, and screwed BSP connections on 1⁄2″, 1″ & 2″ units. Within the tapered flow tube, fluid flow lifts the metering element, which contains a magnet. The external pointer follows the magnetic field and indicates flow against a clear 150th scale. Standard units are calibrated for air or water, but scales can be produced to suit other fluids and process conditions.

The GMTX “Vampire” is an electronic version of the standard GMT metal tube flowmeter, where the mechanical pointer and scale is replaced with an LCD to give local meter and digital display of flow rate and flow total. The totally solid state indicator is either loop powered, or mains AC powered with a 4 to 20mA output. High and low alarms are shown on the liquid crystal display panel, and can be signaled to the plant control system. For other liquids, and for flow measurement at different temperatures and pressures, call Sales who will arrange a custom scale to your requirements. You will need to quote your fluid type, SG, viscosity, pressure, temperature and the units preferred.

  • Flow Rate : 20-417 L/min
  • Operating Pressure : 100 BarG for Stainless Steel, 75 BarG for Brass (or as flange rating)
  • Operating Temperature : 200 ºC (or 50 ºC for low pressure drop models)
  • Accuracy : ±2% FSD
  • Wetted Materials : Stainless Steel or Brass
  • Float Material : Stainless steel, or PVC on Low pressure drop units
  • Guides : Stainless steel
  • Connections : Flanges DIN PN16 or Screwed BSP female
  • Overall Length : 250mm for 1/2″ to 2″ units
  • Flow Range : 10:1 typical, see tables
  • Protection : IP65
  • Flow Scale : 100mm long, 150th typical
  • Standard Conditions : 1.013bar & 20ºC (ATP)1
  • Installation : Vertical with flow upward
  • Display : Large LCD
  • Analogue scale : 10% to 100%, 90mm long
  • Digital display : 4 1/2″ digit display, 10mm high
  • Flow Alarms : High and low
  • GMTXA : 2 x 8A SPCO relays
  • GMTXD : 2 x open collector transistors
  • Accuracy : ±1% FSD
  • Power Supply : GMTXA: 85 – 265V AC, GMTXD: 12 to 24VDC loop powered
  • Output : GMTXA: active 4 to 20mA into 600W max
    GMTXD: 4 to 20mA, 600W max @24V
  • Approval : CENELEC EEx ia IIC T4
Categories:

Not Found

Apologies, but no results were found for the requested archive. Perhaps searching will help find a related post.

Back