Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories
Contact Phone Number and Email Address

Fleck Simplex – pH Correction

You are here : Home | Products & Systems | Water Filters | Fleck | Fleck Simplex | pH Correction

Fleck Simplex - pH Correction


pH Correction Water Filters are commonly used for various different applications within industrial settings but can also be found in residential settings. pH correction is most commonly required when the water supply comes from a borehole or natural spring. Borehole water usually has a pH lower than the desired pH of 7 and can be as low as 6 pH. If left uncorrected, this can cause a multitude of problems with pipework, tanks, boilers and other water treatment equipment not to mention the effect it can have on your industrial production. Even a 0.1 increase or decrease in pH can greatly effect the quality of your water and depending on your application, could cost you dearly.


CodeVessel SizeMax Flow
S10FLF25SXT10PH10" x 54"0.6 m3/hr flow
S10-FLF25SXT13P13" x 54"1.1 m3/hr flow
S10FLF25SXT14PH14" x 65"1.2 m3/hr flow
S10FLF25SXT16PH16" x 65"1.5 m3/hr flow
S10FLF25SXT18PH18" x 65"1.9 m3/hr flow
S10FLF25SXT21PH21" x 60"2.6 m3/hr flow
S10FLF25SXT24PH24" x 69"3.5 m3/hr flow
S10FLF25SXT30PH30" x 78"5.4 m3/hr flow
S10FLF25SXT36PH36" x 78"7.8 m3/hr flow
S10FLF25SXT42PH42" x 78"10.7 m3/hr flow


ImageNamePrice Inc VATBuy