Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

Copper Low & High Range

You are here : Home | Spares & Parts | Water Testing Equipment Water Testing Instruments | Single Parameter Checkers | Copper


Single Parameter Check – Copper Low & High Range

Easier to use and more accurate than chemical test kits

Copper CheckDedicated to a single parameter

Small size, big convenience

Ideal for:

  • Water Quality
  • Education
  • Aquarium
  • Wastewater
  • Environmental

The HI702 and HI747 Checker®HC are simple, accurate, and cost effective way to measure high and low ranges of copper. Designed as a more accurate alternative to chemical test kits, the HI702 and HI747 provide quick, accurate results in four easy steps.

Step One – Add a sample to the included cuvette(s).

Step Two – Insert sample into the Checker®HC and press button to zero.

Step Three – Remove sample and add reagent packet.

Step Four – Reinsert sample, press and hold the button for 3 seconds to start reaction timer. Reading will be taken automatically and the results displayed.

The HI702 and HI747 uses an adaptation of the EPA method. The reaction between copper and the bicinchoninate reagent causes a purple tint in the sample.

CodeRangeDescriptionPrice
HI747 (LR) (Copper Low Range)0 to 999 ppbHI747 Checker®HC is supplied with sample cuvettes with caps (2), copper LR reagent starter kit (reagents for 6 tests), battery, instructions and quick start guide.£60.00Buy Now
HI702 (HR) (Copper High Range)0.00 to 5.00 ppmHI702 Checker®HC is supplied with sample cuvettes with caps (2), copper HR reagent starter kit (reagents for 6 tests), battery, instructions and quick start guide.£60.00Buy Now

Specifications
HI747 (LR)(Copper Low Range)HI702 (HR) (Copper High Range)
Range0 to 999 ppb0.00 to 5.00 ppm
Resolution1 ppb0.01 ppm
Accuracy @ 25°C/77°F± 10 ppb ± 5% of reading± 0.05 ppm ±5% of reading
Light SourceLED @ 575 nm
Light Detectorsilicon photocell
Environment0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type(1) 1.5V AAA
Auto-offafter ten minutes of non-use
Dimensions81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)
Weight64 g (2.25 oz.)
Methodadaptation of the EPA method. The reaction between copper and the bicinchoninate reagent causes a purple tint in the sample

Back