Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

High Flow Plastic Filter Housings

You are here : Home | Products & Systems | Water Filters | Cartridge Filters | Plastic Filter Housings | High Flow Housings


High Flow Plastic Filter Housings

 

FILTER SELECTION
High Flow HousingsHigh Flow Cartridge Filters

 

FilterOne

Filterone Filter HousingThe FilterOne housing is manufactured from polypropylene and suitable for flow rates up to 60m3/hr. The 40″ cartridge elements for use with the filter one are available in the range of 1 to 50 micron.

Specifications

  • Inlet / Outlet : 3” Flange
  • Max. working pressure : 6 bar
  • Burst Pressure : 20 bar
  • Max. Working Temperature : 40°C
  • Capacity empty at 2 bar : 60 m³/h
  • Life test : 100‚000 cycles 0–10 bar
  • Number of cartridges : 1
  • Inner diameter : 76 mm (3”)
  • Outer diameter : 147,5 mm (5,8”)

 

ImageNamePrice Inc VATBuy
23" High Flow Water Filter Housing23" High Flow Water Filter Housing£1,551.60
1551.60
40" High Flow Water Filter Housing40" High Flow Water Filter Housing£1,560.00
1560

Big Bubba

Big Bubba Water FilterRugged construction

Big-Bubba filter housings are made of rugged, glass-reinforced polypropylene so they will not chip, rust or dent. And because all wetted surfaces are non-metallic, they are ideal when chemical compatibility is an issue and for sea water applications.

Low cost

Big-Bubba filters are an economical replacement for stainless steel filtration equipment because of their non-metallic construction and today’s high cost of stainless steel!

Applications

Big-Bubba filters are ideal for a wide range of applications, including:

  • Commercial filtration
  •  Industrial filtration
  • Pre-filtration for reverse osmosis equipment
  • Community water systems
  • Sea water applications due to their non-corrosive construction
  • Replacement for bag filters for more filter area
  • Replacement for multiple cartridge filters for greater convenience
  • Water for livestock & poultry
  • Whole house filtration
  • Proprietary cartridges

We offer a full line of replacement cartridges for Big-Bubba filters, all with double o-ring seals for superior performance. Cartridges are easy to install, easy to service and easy replace. Some of the filter media we use in select micron ratings are cleanable and reusable to reduce filtration costs.

E-Z change-out

Cartridge replacement is easy as 1-2-3:
1. Remove swing bolts.
2. Remove lid.
3. Rotate cartridge 1/4 turn and pull-up.

Two outlets

Big-Bubba filters have two outlets on opposite sides to allow more flexibility with piping configurations. Filter may be installed in-line or piping may come from the same direction. A plug is provided for the outlet, not used.

Specifications

  • Pipe fittings : 2” slip
  • Overall height : 40”
  • Width (vessel OD) : 12”
  • Maximum flow rate : 150 GPM* (36 M3/hr)
  • Maximum flow (carbon) : 15 GPM
  • Maximum flow (1 Absolute) : 50 GPM
  • Maximum temperature : 175°F (80°C) @ 80 psi
  • Maximum working pressure : 125 psi (8.75 bar)
  • Burst test : 300 psi
  • Cycle test : 100,000
ImageNamePrice Inc VATBuy
Big Bubba Filter HousingBig Bubba Filter Housing£738.00
738

Back