Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

Fleck Duplex 9000 Water Softener

Rated 4.50 out of 5 based on 2 customer ratings
(2 customer reviews)

£873.00£1,966.00

Your are here : Home | Products & Systems | Water Softeners | Fleck Duplex Fleck Duplex 9000


Water Softeners | Fleck Duplex 9000

Clear
SKU: S10-FLD9 Category:

Overview

Fleck Duplex 9000 Water Softener

Units come supplied with:

  • Fleck 9000 Softener Control Valve – either Time Clock or Metered
  • Appropriate size of WRAS approved resin vessel
  • Riser with bottom distributor attached to the riser tube and top basket (cut to vessel size)
  • Appropriate volume of Softener Resin
  • Appropriate size brine tank
  • Drain hose 3m
  • Brine fill/ Draw tube 3m

Installation is easy

  • Connect the inlet and the outlet
  • Connect the drain
  • Connect the brine system
  • Plug in the transformer 

General conditions for installation

  • Inlet/ Outlet connection – 1” BSP
  • Drain Connection – ½” Hose barb
  • Electrical Rating – 230-24V / 50 Hz
  • Power Rating – 340 watts
  • Min inlet pressure – 200 kPa (2bar)
  • Max inlet Pressure – 700 kPa (7bar)
  • Vacuum – Not permitted
  • Average Pressure Loss – 100 kPa (1bar)
  • Max Water Temp – 43ºc

General Information

The Fleck 9000 Duplex Water Softener Units are suitable for Commercial, industrial and residential applications. All of our systems are either Time Clock or meter controlled (please select from the drop down menu)

The benefit of a meter controlled system is that it allows the system to calculate your water usage and instigate a regeneration cycle only when you have consumed enough water for the resin bed to be exhausted. These systems prevent any unnecessary water wastage and also ensure that your resin bed is never running past the state of exhaustion.

Timer controlled softeners allow you to set a particular time for regeneration and are also consistent and reliable.

We supply Simplex, Duplex, Triplex and bespoke water softening systems.

Duplex softeners are designed to produce a continuous and uninterrupted supply of softened water 24/7. To achieve this, these systems have a twin tank that work alternately so that there can always be one tank in service while the other thank is regenerating. These systems are particularly useful for industrial or commercial applications where stopping production for the regeneration process is simply not possible.

 

Dimensions (mm)
Resin LitresValve
H1
Vessel
H2
Vessel
B1
Brine
Tank H3
Brine
Tank B2
Softener
Ht
Inlet/
Outlet
101704492087805906191″
2017090420878059010741″
2517090523378059010751″
3017090525778059010751″
40170112425783067012941″
50170138725783067015571″
60170123530483067014051″
751701374334100076015441″
100170166036993087018301″
1201701660369123086018301″
1401701660406123086018301″

 

 

General conditions for installation
Connection Inlet & Outlet1” BSPF
Drain Connection *½” Hose barb
Electrical Rating230-12V / 50 Hz
Power Rating8 watts
Minimum Inlet Pressure200 kPa ( 2 Bar )
Maximum Inlet Pressure700 kPa ( 7 Bar )
VacuumNot permitted
Average Pressure Loss **100 kPa ( 1 Bar )
Maximum Water Temperature43ºc

 

 

* Open drain required
** It is recommended that a 20um Pre-cartridge filter be installed prior to the inlet of the water softener

 

 

Resin
TypeStrong acid cation resin – softening, food grade quality
Life Span15 years under normal operating conditions

 

 

Ion exchange
Litres of Resin1020253040506075100120140
Softener Capacity
as CaCO³
200ppm2.5m³5.0m³6.2m³7.5m³10m³12.5m³15m³18.7m³25m³30m³35m³
250ppm2.0m³4.0m³5.0m6.0m³8.0m³10m³12m³15m³20m³24m³28m³
300ppm1.6m³3.3m³4.1m³5.0m³6.6m³8.3m³10m³12.5m³16.6m³20m³23.3m³
Salt Conskg/reg1.22.43.03.64.86.07.29.012.014.416.8

 

 

Flow Rate
Litres of Resin 1020253040506075100120140
 nominal m³/hr0.51.01.31.51.82.32.73.03.03.53.5
 peak m³/hr0.61.21.51.82.22.53.34.04.04.74.7
minimum metered60 Litres/Hour (¾” Meter) – 160 Litres/Hour (1” Meter)

 

 

Regeneration
StartImmediately after reaching the set capacity
ManualManual operation as required
Time Clock Version (STE0)7 Day
Volume Immediate8 or 40 m³ (¾” Meter)
 20 or 100 m³ (1” Meter)
 ¾” SE/SXT Meter ( 10 Litre – 100 Litre Softeners Only
Remarks:The interval between regenerations should not be more than 4 days, this is to prevent bacteria growth.
Regenerations should be more than 8 hours apart.

 

 

Regeneration water usage
Litres of Resin 1020253040506075100120140
1) BackwashLitres152545457575105120150150215
2) Brining + Slow RinseLitres20506080110150180220290390485
3) Fast RinseLitres254560607575105120190190265
Total60120165185260300390460630730965

Fleck 9000 Service Kit

Fleck Valve 9000 Service Kit
Piston Assy Lower 9000/9100
Seal and Spacer Kit 9000/9100 Upper & Lower
Brine Valve 1600 Assy 9000
Injector O-Ring Kit 9000
Microswitch
Microswitch
Microswitch
Microswitch
Riser Tube O-Ring 9000
Tank Adaptor O-Ring 5600/9000
£196.19Buy Now


Fleck Duplex 9000 Manual

Adobe PDF

1 Year Warranty

2 reviews for Fleck Duplex 9000 Water...

  1. Rated 4 out of 5

    J Spencer

    Helpful staff on phone item as discribed.

  2. Rated 5 out of 5

    Darren Murphey

    Top Quality service from Professional and helpful staff.

Add a review

Your email address will not be published. Required fields are marked *

What is a Simplex Water Softener?

A simplex water softener consists of one vessel containing ion exchange resin. Once the iron exchange resins are exhausted, the water softener will go into the regeneration sequence. During the regeneration sequence that takes about two hours, there will be no water passed through the softener to service. If the water softener is time controlled, it is possible to set the regeneration time to 3am when there is usually no requirement for water. If the water softener is a water meter controlled unit, it is more difficult to gage what time the water softener will regenerate. If a continuous supply of softened water is required, it is advisable to install a duplex water softener.

What is a Duplex Water Softener?

A duplex water softener consists of two vessels containing ion exchange resin, once the first column of resin has exhausted and goes into regeneration, the second column goes into service. This maintains soft water to service at all times. Duplex water softeners are usually water meter controlled but in some cases, duplex water softeners can be time clock controlled.

Back