Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories
Contact Phone Number and Email Address

Autotrol Simplex Water Softener


Your are here : Home | Products & Systems | Water Softeners | Autotrol Simplex | Autotrol Simplex

Water Softeners | Autotrol Simplex

SKU: S8-430203516 Category:


Autotrol Simplex VER. 1-2-3 Water Softener 

Units come supplied with:

  • Autotrol Ver 1-2-3 Softener Control Valve – either Time Clock or Metered
  • Appropriate size of WRAS approved resin vessel
  • Riser with bottom distributor attached to the riser tube and top basket (cut to vessel size)
  • Appropriate volume of Softener Resin
  • Appropriate size brine tank
  • Drain hose 3m
  • Brine fill/ Draw tube 3m

Installation is easy

  • Connect the inlet and the outlet
  • Connect the drain
  • Connect the brine system
  • Plug in the transformer

General conditions for installation

  • Inlet/ Outlet connection – 1 ¼” Union
  • Drain Connection – ¾”
  • Electrical Rating – 230-24V / 50 Hz
  • Min inlet pressure – 200 kPa (2bar)
  • Max inlet Pressure – 600 kPa (7bar)
  • Vacuum – Not permitted
  • Average Pressure Loss – 100 kPa (1bar)
  • Max Water Temp – 43ºc

General Information 

The Autotrol VER 1,2 and 3 Simplex Water Softener Units are suitable for commercial, industrial and residential applications. All of our systems are either Time Clock or meter controlled (please select from the drop down menu)

The benefit of a meter controlled system is that it allows the system to calculate your water usage and instigate a regeneration cycle only when you have consumed enough water for the resin bed to be exhausted. These systems prevent any unnecessary water wastage and also ensure that your resin bed is never running past the state of exhaustion.

Timer controlled softeners allow you to set a particular time for regeneration and are also consistent and reliable.

We supply Simplex, Duplex, Triplex and bespoke water softening systems. Simplex systems are ideal in settings where it is not essential to have a soft water supply 24/7. During the regeneration process, your system is likely to be offline for at least 2 hours during which time, a simplex system will pass hard water until the regeneration process has finished. If the system is timer controlled, this can be manually set to a time that you are less likely to require soft water

1 Year Warranty

Autotrol Simplex Water Softener DataSheet

Adobe PDF

Autotrol Simplex Water Softener Spares

Autotrol Simplex Water Softener Spares Manual

Adobe PDF


There are no reviews yet.

Be the first to review “Autotrol Simplex Water Softener”

Your email address will not be published. Required fields are marked *