Exact matches only
Search in title
Search in content
Search in posts
Search in pages
product
product_variation
Filter by Categories
Contact Phone Number and Email Address

HC 2 Series

You are here : Home | Spares & Parts | Pumps | AWS Dosing Pumps | Standard Dosing Pumps | HC 2 Series


AWS Dosing Pumps – HC 2 Series

HC 200

  • hc200Electronic Frequency control
  • Manual Stroke length adjustment
  • PTFE Diaphragm
  • 2 Line LCD display
  • Analogue Controls
  • Economically Priced
  • Stop/Start button
  • Dosing Head with integral priming valve
  • Double Ball valves as standard
  • Lip valves on request
  • Horizontal Mounting
  • Optional Vertical mount bracket at extra cost
  • Reinforced Plastic PP housing IP65
  • Supplied complete with hose accessory kit
  • Low Level facility
  • Level probe on request

The HC200 electronic solenoid driven dosing pump incorporates a mechanical stroke length adjustment feature as well as electronic frequency control. This allows an extra manual mechanical stroke length adjustment, thus further increasing the pumps accuracy, and greatly increasing the “turn down ratio” to help achieve much lower dosing rates.

PUMP CONTROL MODES
Double controls which includes frequency adjustment by touch sensitive buttons on front facia and manual stroke

length adjustment of injection volume that allows for a higher dosing accuracy.

Constant mode: The pump flow rate is adjusted via electronic frequency control by using touch sensitive buttons on front facia and will constantly deliver according to the flow rate selected.

Stroke length adjustment: A further adjustment is available by means of a manual stroke length control Optional Level control: If fitted a level switch the pump stops when the chemical level runs low.


HC 201

  • HC 201Programmable Microprocessor with several control options
  • PTFE Diaphragm
  • Electronic Frequency control
  • Manual Stroke length adjustment
  • Multifunction dosing modes
  • Digital keypad controls
  • Stop/Start button
  • Dosing Head with integral priming valve
  • Double Ball valves as standard
  • Lip valves on request
  • Horizontal Mounting
  • Optional Vertical mount bracket at extra cost
  • Reinforced Plastic PP housing IP65
  • Supplied complete with hose accessory kit
  • Optional flow failure facility
  • Low Level facility
  • Level probe on request

The HC201 is a multifunctional electronic solenoid driven dosing pump that has several electronic control options and incorporates a mechanical stroke length adjustment feature as well as electronic frequency control.

PUMP CONTROL MODE

Digital controls: allow easy programming for both proportional and manual modes.

Programming modes:

Manual mode: enables you to select the exact number of strokes, between 1-120 strokes per minute which can be used to prime the pump.

Pulse Multiplication mode: The pump will stroke in response to an external pulse. The pump control panel enables you to set the number of pulses the pump will stroke from a single pulse.

Pulse Division mode: The pump will stroke in response to external pulses. The impulse counter enables you to set the number of pulses received before the pump does 1 stroke.

Milliamp mode: The pump will stroke in response to an external Milliamp signal. The pump control panel enables you to spread the dosing pumps output across all or some of the milliamp signal. There are also 2 set points for creating your own dosing bandwidth.


HC200 PH/RX

  • HC201Built-in pH- Rx instrument
  • pH range 0-14pH
  • Redox range +/- 0-1000mv
  • Manual Stroke length adjustment
  • PTFE Diaphragm
  • 2 Line LCD display
  • Analogue Controls
  • Stop/Start button
  • Dosing Head with integral priming valve
  • Double Ball valves as standard
  • Lip valves on request
  • Horizontal Mounting
  • Optional Vertical mount bracket at extra cost
  • Reinforced Plastic PP housing IP65
  • Supplied complete with hose accessory kit
  • Low Level facility
  • Level probe on request

The HC200 PH/RX electronic solenoid driven dosing pump has an integral pH/Redox controller with a single control set point which monitors the pH/Redox level of water. Its main purpose is to operate the pump if this level goes above or below the set point.

This set point can be adjusted and features a digital display of the value at any time. Connection to the electrode is made via a BNC connector. It also incorporates a mechanical stroke length adjustment feature.

PUMP FUNCTIONS, DOSING MODES AND CONTROLS Digital controls: allow easy programming for both pH & Redox settings

Optional Level control: If fitted a level switch stops the pump when the chemical level runs low.

Product CodeDescriptionPrice
HC200 02230V PP-GL-VT on/off£371.58Buy Now
HC200 04230V PP-GL-VT on/off£371.58Buy Now
HC200 09230V PP-GL-VT on/off£371.58Buy Now
HC200 15230V PP-GL-VT on/off£371.58Buy Now
HC201 02230V PP-GL-VT Mutifunctional£458.56Buy Now
HC201 04230V PP-GL-VT Multifunctional£458.56Buy Now
HC201 09230V PP-GL-VT Multifunctional£458.56Buy Now
HC201 15230V PP-GL-VT Multifunctional£458.56Buy Now
HC200 PH/RX 04230V PP-GL-VT pH/rx/Orp proportional£559.55Buy Now
HC200 PH/RX 09230V PP-GL-VT pH/rx/Orp proportional£559.55Buy Now

Back