You are here : Home | Consumables | Chemicals | Cleaning Chemicals | IWE CC1

Cleaning Chemicals

 

IWE CC1 Membrane Biocide

 

[su_note note_color=”#e5f2ff” radius=”10″]IWE CC1 is a fast acting, broad-spectrum biocide used for cleaning Reverse Osmosis and Nano-Filtration membranes. It can be used both on and off-line to eliminate microbiological fouling. When used in potable water applications, IWE CC1 should be used ‘off-line’. IWE CC1 is also effective in removing biofilm from pumps, tanks and pipe-work. Best results are obtained when IWE CC1 is used at a pH 5.5 – 7.0. Residual IWE CC1 can be deactivated to harmless byproducts by using sodium bisulphite. IWE CC1 is readily biodegradable in the environment; the degradation rate is enhanced at increasing pH and temperature. [/su_note] [two_third] [product_table totals=”false” page_length=”false” reset_button=”false” search_box=”false” columns=”image,name,price:Price Inc VAT,add-to-cart” sort_by=”price” show_quantity=”true” category=”iwe-cc1″] [/two_third] [one_third_last]

Membrane Cleaning Chemicals - iwe-cc1

[/one_third_last] [two_third padding=”0 10px 0 0″]

 

Application

When used ‘off-line’ as a membrane cleaner, IWE CC1 should be dosed at 40 – 80mg/l for periods up to 60 minutes. When used ‘on-line’ in non-potable applications IWE CC1 should be dosed at 100 – 200mg/l for 30 minutes. Pre-diluting IWE CC1 prior to use is not recommended as this will cause rapid degradation of the solution and loss of efficacy.

Health and Safety

IWE CC1 is based on an organo-bromine compound. It is corrosive to carbon steel and certain other alloys so all pumps, pipe-work and tanks should be made from acid resistant materials. A material safety data sheet is available on request.

Classification

CHIP: Harmful | UN: Corrosive

Packaging

Available as 25 ltr keg, 250 ltr drum or 1000 ltr IBC.

The shelf life of IWE CC1 is 12 months when stored in a cool place. At ambient temperatures above 20ºC the shelf life of IWE CC1 may be significantly reduced.

Typical properties

Appearance: pale amber liquid
pH as supplied: 1.5 – 5.0
Specific gravity: 1.20 – 1.30
Freezing point: < – 50°C

[/two_third]

 

[one_third_last]

Genesol 30

  • Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
  • Effective against most micro-organisms
  • Fast acting – short contact time needed
  • Compatible with all polyamide membranes
  • Easily deactivated to harmless by-products
  • Can be used to clean pre-treatment systems
[/one_third_last]