You are here : Home | Consumables | Chemicals | Cleaning Chemicals | IWE CC10

Cleaning Chemicals

 

IWE CC10 Membrane Cleaner (Acidic based Powder)

 

[su_note note_color=”#e5f2ff” radius=”10″]IWE CC10 has been developed as an inorganic scale cleaner and iron solvent for Reverse Osmosis and Nano-filtration membrane systems. IWE CC10 is highly effective at removing inorganic foulants, such as iron and calcium carbonate and also has proven efficacy against removing membrane biofilms. [/su_note] [two_third] [product_table totals=”false” page_length=”false” reset_button=”false” search_box=”false” columns=”image,name,price:Price Inc VAT,add-to-cart” sort_by=”price” show_quantity=”true” category=”iwe-cc10″] [/two_third] [one_third_last]

Membrane Cleaning Chemicals - iwe-cc10

[/one_third_last] [two_third padding=”0 10px 0 0″]

 

Application

IWE CC10 should be used as a 1-2% solution, alternately soaked and recycled through the membrane system for 1-2 hours. When using IWE CC101, the cleaning solution pH will stabilise at pH 2.5 – 3.5. If the pH increases above this value during the cleaning process, the solution should be discarded and replaced. It is recommended that the membranes be cleaned at least 5°C above ambient temperature. The membrane manufacturer’s guidelines should be followed with respect to pH and temperature. Before returning the plant to service, the membrane system should be thoroughly flushed, until the pH values of the feed and the discharge are the same. Following cleaning, the product water conductivity may initially be high but should revert to normal after a few hours operation. IWE CC10 is readily dissolved in water: cleaning solutions should be used immediately after preparation. Cleaning solutions of IWE CC10 will have a tendency to foam. IWE CC10 contains bubble generating technology to gently agitate and lift membrane foulants away from the surface increasing cleaning efficiency.

Health and Safety

IWE CC10 is a mixed blend of acid chelants and is classified as non-toxic. Low pH solutions are corrosive to carbon steel and concrete so all chemical tanks, pumps and pipe-work should be made from acid resistant materials. A material safety data sheet is available on request

Classification

CHIP: Irritant | UN: Corrosive

Packaging

Available as 25 ltr keg, 250 ltr drum or 1000 ltr IBC.

Shelf life of IWE CC10 is 1-2 years under normal storage conditions. Ensure the packaging remains sealed and the IWE CC10 remains dry.

Typical properties

Appearance: white powder

pH of a 1% solution: ~2.5

Bulk density: 1.04g/cm2

Freezing point: not applicable

[/two_third]

 

[one_third_last]

  • Suitable for use in Reverse Osmosis (RO) and NanoFiltration (NF) membranes
  • Effective against inorganic deposits and scales
  • Effective against iron fouling
  • Compatible with both polyamide and cellulose acetate membranes
  • Effective against aluminium based foulants
  • Effective against many species of micro-organism
  • NSF listed
[/one_third_last]