CLACK birm WATER FILTERS

clack birm water filters

Birm Product Table

RefDescriptionControl ValveTank Size*Media VolumeFlow Rate
B1.5-C10.62 m3/hr Birm WS1 SystemClack WS110” x 54”1.5 ft30.62 m3/hr
B2-C10.89 m3/hr Birm WS1 SystemClack WS112” x 52”2 ft30.89 m3/hr
B2.5-C11.05 m3/hr Birm WS1 SystemClack WS113” x 54”2.5 ft31.05 m3/hr
B3-C11.21 m3/hr Birm WS1 SystemClack WS114” x 65”3 ft31.21 m3/hr
B3.5-C11.59 m3/hr Birm WS1 SystemClack WS116” x 65”3.5 ft31.59 m3/hr
B5-C12.0 m3/hr Birm WS1 SystemClack WS118” x 65”5.0 ft32.0 m3/hr
B6.5-C12.73 m3/hr Birm WS1 SystemClack WS121” x 60”6.5 ft32.73 m3/hr
B9-C153.57 m3/hr Birm WS1.5 SystemClack WS124” x 69”9.0 ft33.57 m3/hr
B15-C155.57 m3/hr Birm WS1.5 SystemClack WS1.530” x 72”15.0 ft35.57 m3/hr
B20-C28.02 m3/hr Birm WS2 SystemClack WS236” x 72”20.0 ft38.02 m3/hr
B28-C210.92 m3/hr Birm WS2H SystemClack WS2H42” x 78”28.0 ft310.92 m3/hr
B36-C314.26 m3/hr Birm WS3 SystemClack WS2H48” x 82”36.0 ft314.26 m3/hr
* Birm comes in 1cu.ft bags
** Flow rates based on a five 5 gpm / sqft for iron and manganese removal

Birm

Birm is a relatively inexpensive material which can be used for iron and manganese removal by oxidation. It requires a pH of 7 or more for iron removal and 8 for manganese removal (it uses dissolved oxygen in the water to oxidise the metal). As it acts a catalyst it is not consumed so Birm doesn’t require regenerating or topping up. Birm also has the advantage of acting as a filter, removing turbidity. If the pH of the water is too low than correction may be required. Media life expectancy is 2 to 3 years.

Need Help?

Unsure which water filter will best suit your requirements? Please contact us on
01629 363311

we are more than happy to help.