CHROMIUM SINGLE PARAMETER CHECKS

CHROMIUM LOW & HIGH RANGE

Chromium Water Testing Kits

  • Handheld Colorimeters
  • Easier to use and more accurate than chemical test kits
  • Dedicated to a single parameter
  • Small size, big convenience
  • Ideal for Water quality
  • Environmental
  • Plating
  • Education

There are two natural forms of ionic chromium: the hexavalent Cr(VI) and the trivalent Cr(III). Cr(III) is much less toxic than Cr(VI) and seldom found in potable waters. Cr(VI), however, is toxic to humans and is found in water. Even though the toxic effects from Cr(VI) in drinking water are not well documented, it is a suspected carcinogen.

There are many industries that use chromic acid and other forms of Cr(VI) that could be a possible source of Cr(VI) pollution in either water, air, or both. One industry that can introduce Cr(VI) to water sources is the chrome-plating industry. Chromic acid is used in the electroplating process and can be present in industrial waste waters. Cr(VI) also can enter water supplies from industrial cooling towers where chromic acid is added to the water to inhibit metal corrosion.

The maximum permissible level of Cr(VI) allowed to be released into the waterways is 50 ppb. Its level in drinking water is normally much lower, and a level higher than 3 ppb is suggestive of industrial pollution.

The HI723 and HI749 Checker®HC Handheld Colorimeters are a simple, accurate, and cost effective way to measure Cr(VI). Each model is designed for a specific range (low or high) in order to provide high levels of accuracy.

The contoured style of these Checker®HC’s fit easily in the palm of your hand or pocket and the large LCD is easy to read. The auto shut-off feature assures the battery life will not be drained if you forget to turn it off.

Specifications
HI749 (LR)HI723 (HR)
Range0 to 300 ppb0 to 999 ppb
Resolution1 ppb1 ppb
Accuracy @ 25°C/77°F±2 ppb ±4% of reading±5 ppb ±4% of reading
Light SourceLED @ 525 nm
Light Detectorsilicon photocell
Environment0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type(1) 1.5V AAA
Auto-offafter ten minutes of non-use
Dimensions81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”)
Weight64 g (2.25 oz.)
Methodadaptaion of the ATSM, Manual of Water and Enviornmental Technology, D 1687-92, Diphenylcarbohydrazide method

Need Help?

We can advise on the correct water testing equipment for your requirements.
Please contact us on
01629 363311

we are more than happy to help.