Ultra Violet Disinfection - UV MAX D

You are here : Home > Products > Residential > UV MAX Range > UV MAX D

Advanced Lamp Technology

Low pressure high-output lamp technology provides higher UV output for better disinfection in a system approximately half the size of conventional systems - saving space and making installation simpler

Unique Sizing System

Allows you to select the unit based on flow rate, UV transmittance, and the UV dose required.
Model D treats up to 17 US gpm / 64 lpm (16 mJ/cm2 at 95% UV transmittance)

User Interface

Digital display provides key information
Elapsed time meter tells you how long the lamp has been in service. A service reminder lets you know when the lamp needs to be changed
Audio and visual alarms tell you if there is a problem with the operation of the unit
Diagnostic output tells the user what the source of any possible failure is
Alarm reset button allows postponement of alarm

Lamp/Sleeve Combination

Lamp and sleeve are removed without the use of any tools
Lamp and sleeve remove from the reactor chamber as one piece ensuring you are aware of any build up of minerals on the sleeve that may interfere with the proper UV dose being delivered to the water

Auto-ranging Electronic Power Supply

More energy efficient
Withstands fluctuations in voltage that can cause low UV output and damage to the lamp
Automatically adjusts to the input voltage and frequency to allow use of multiple global power grids

Optional UV monitor

An optional UV monitor continuously monitors the amount of UV making it through the water and notifies you if disinfection is not being assured

Optional Shut-off Valve and Remote Alarm

Shut-off valve stops water flow when disinfection is not assured
Remote alarm allows for notification of alarm conditions at a location remote from the system

Snap-on Safety Cap

Prevents the harness from accidentally being disconnected
Ensures that the lamp is disconnected before it is removed from the reactor chamber to prevent damage to eyes and skin from the UV light

Compare Models C and D

Models C and D both treat up to 17 US gpm (64 lpm), however model D offers features (below) not available on model C.

User Interface

Digital display provides key information
Elapsed time meter tells you how long the lamp has been in service. A service reminder lets you know when the lamp needs to be changed
Audio and visual alarms tell you if there is a problem with the operation of the unit
Diagnostic output tells the user what the source of any possible failure is
Alarm reset button allows postponement of alarm Auto-ranging Electronic Power Supply
Automatically adjusts to the input voltage and frequency to allow use of multiple global power grids

Optional UV monitor

An optional UV monitor continuously monitors the amount of UV making it through the water and notifies you if disinfection is not being assured Optional Shut-off Valve and Remote Alarm
Shut-off valve stops water flow when disinfection is not assured
Remote alarm allows for notification of alarm conditions at a location remote from the system

Industrial Water Equipment Ltd

2nd Floor, 13 Upper Baggot Street, Dublin 4, Ireland
TEL: + 00 353 15262557

-------------------------------------
124 / 126, North Parade, Matlock Bath, Derbyshire, DE4 3NS
TEL: +44 (0) 1629 580468