Ultrafiltration from Industrial Water
Equipment Ltd
Stand-type unit for the filtration of pre-filtered
or settled surface or wellwater, operating on the principle
of ultrafiltration.
Stainless steel main frame housing the instruments and
controls. Centrifugal pump with automatical 100 ?m backwash
filter, high efficiency ultrafiltration modules, vertical
mode, housing multibore PES-fibres as membranes, separate
tank and pump for backwash and SIP/CIP-Operation, dosing
pump for the introduction of SIP/CIP-Chemicals and optional
filtrate disinfection.
Pneumatic operated valves (air-compressor
optional) with solenoid pilot-valves for fully automated
filtration, backwash- and SIP/CIP-cycles.
Pressure monitoring gauges for inlet and
outlet pressure of the ultrafiltration modules. Pressure
switch for detection of malfunction in compressed air
supply.
Flow meter for monitoring of filtrate flow
rate.
Control cabinet with lockable main switch,
electrical switch gear for control of the pumps, PLC SIEMENS
S7-200 control unit for automation of filtration, backwash-
and SIP/CIP-procedures.
Unit completely wired, pre-assembled and
ready for installation. Electrical equipment in accordance
with VDE 0100 part 600, VDE part 1.
Ultrafiltration
Unit UF 1D1 (Surface water NTU <5) |
| Filtrate flow rate (100 lmh)* |
0.45 m3/h |
| filtrate Production daily approx. |
10 m3 |
| filtrate recovery |
95 % |
| operating temperature |
5/35°C |
| operating pressure filtration |
1.0 bar |
| operating pressure backwash |
1.0-2.0 bar |
| raw-water connection |
DN 20 |
| filtrate connection |
DN 20 |
| waste-water connection |
DN 32 |
| power requirement |
1.0 kW |
| voltage |
3 x 400 V/50 Hz |
| dimensions: |
|
| - height |
1,700 mm |
| - width |
2,000 mm |
| - depth |
800 mm |
| weight |
150 kg |
| * Filtrate-flux depends on the
quality of rawwater |
|
Ultrafiltration
Unit UF 2D1 (Surface water NTU <5) |
| Filtrate flow rate (100 lmh)* |
0.90 m3/h |
| filtrate Production daily approx. |
20 m3 |
| filtrate recovery |
95 % |
| operating temperature |
5/35°C |
| operating pressure filtration |
1.0 bar |
| operating pressure backwash |
1.0-2.0 bar |
| raw-water connection |
DN 20 |
| filtrate connection |
DN 20 |
| waste-water connection |
DN 32 |
| power requirement |
1.0 kW |
| voltage |
3 x 400 V/50 Hz |
| dimensions: |
|
| - height |
1,700 mm |
| - width |
2,000 mm |
| - depth |
800 mm |
| weight |
170 kg |
| * Filtrate-flux depends on the
quality of rawwater |
| Ultrafiltration
Unit UF 3D1 (Surface water NTU <5) |
| Filtrate flow rate (100 lmh)* |
1.35 m3/h |
| filtrate Production daily approx. |
30 m3 |
| filtrate recovery |
95 % |
| operating temperature |
5/35°C |
| operating pressure filtration |
1.0 bar |
| operating pressure backwash |
1.0-2.0 bar |
| raw-water connection |
DN 20 |
| filtrate connection |
DN 20 |
| waste-water connection |
DN 32 |
| power requirement |
1.0 kW |
| voltage |
3 x 400 V/50 Hz |
| dimensions: |
|
| - height |
1,700 mm |
| - width |
2,000 mm |
| - depth |
800 mm |
| weight |
190 kg |
| * Filtrate-flux depends on the
quality of rawwater |
| Ultrafiltration
Unit UF 1D3 (Surface water NTU <5) |
| Filtrate flow rate (100 lmh)* |
3.0 m3/h |
| filtrate Production daily approx. |
68 m3 |
| filtrate recovery |
95 % |
| operating temperature |
5/35°C |
| operating pressure filtration |
1.0 bar |
| operating pressure backwash |
1.0-2.0 bar |
| raw-water connection |
DN 32 |
| filtrate connection |
DN 32 |
| waste-water connection |
DN 50 |
| power requirement |
2.2 kW |
| voltage |
3 x 400 V/50 Hz |
| dimensions: |
|
| - height |
2,000 mm |
| - width |
3,000 mm |
| - depth |
800 mm |
| weight |
210 kg |
| * Filtrate-flux depends on the
quality of rawwater |
| Ultrafiltration
Unit UF 1D5 (Surface water NTU <5) |
| Filtrate flow rate (100 lmh)* |
5.0 m3/h |
| filtrate Production daily approx. |
114 m3 |
| filtrate recovery |
95 % |
| operating temperature |
5/35°C |
| operating pressure filtration |
1.0 bar |
| operating pressure backwash |
1.0-2.0 bar |
| raw-water connection |
DN 32 |
| filtrate connection |
DN 32 |
| waste-water connection |
DN 50 |
| power requirement |
2.2 kW |
| voltage |
3 x 400 V/50 Hz |
| dimensions: |
|
| - height |
2,000 mm |
| - width |
3,000 mm |
| - depth |
800 mm |
| weight |
220 kg |
| * Filtrate-flux depends on the
quality of rawwater |
| Ultrafiltration
Unit UF 2D5 (Surface water NTU <5) |
| Filtrate flow rate (100 lmh)* |
10.0 m3/h |
| filtrate Production daily approx. |
228 m3 |
| filtrate recovery |
95 % |
| operating temperature |
5/35°C |
| operating pressure filtration |
1.0 bar |
| operating pressure backwash |
1.0-2.0 bar |
| raw-water connection |
DN 50 |
| filtrate connection |
DN 50 |
| waste-water connection |
DN 80 |
| power requirement |
2.2 kW |
| voltage |
3 x 400 V/50 Hz |
| dimensions: |
|
| - height |
2,000 mm |
| - width |
3,000 mm |
| - depth |
800 mm |
| weight |
250 kg |
| * Filtrate-flux depends on the
quality of rawwater |
|
Industrial Water Equipment Ltd
124 / 126, North Parade, Matlock Bath, Derbyshire, DE4
3NS
TEL: +44 (0) 1629 580468
FAX: +44 (0)1629 501055
-------------------------------------
2nd Floor, 13 Upper Baggot Street, Dublin
4, Ireland
TEL: + 00 353 15262557
FAX: + 00 353 16865541
info@industrialwaterequipment.co.uk
| 24Hr
Helpline - Emergency
Number : 07775 661688 |
| Quick
Shop | Sitemap
| Terms
& Conditions of Sale | Returned
Goods Policy |
Payment
Option |
|