Contact Phone Number and Email Address

Siata Simplex 132 Water Softener

Siata 132 Water Softener


Water Softener – Siata Simplex 132


Your are here : Home > Products & Systems > Water Softeners > Siata Simplex


Clear selection
SKU: S10-SIS132ST Category:

All Industrial Water Equipments Water Softeners are supplied in an easy self-assembly kit requiring no special tools. Assembly of this kit will take between ten minutes to 30 minutes dependent upon the size of the softener. Full instructions are enclosed.

Dimensions (mm)
Resin LitresValve H1Vessel H2Vessel B1Brine Tank H3Brine Tank B2Softener HTInlet / Outlet


General conditions for installation
Connection Inlet & Outlet1” BSP
Drain Connection *¾” Hose barb
Electrical Rating230-12V / 50 Hz
Power Rating4.6 VA
Minimum Inlet Pressure200 kPa ( 2 Bar )
Maximum Inlet Pressure600 kPa ( 7 Bar )
VacuumNot permitted
Average Pressure Loss **100 kPa ( 1 Bar )
Maximum Water Temperature43ºc


* Open drain required
** It is recommended that a 20um Pre-cartridge filter be installed prior to the inlet of the water softener


TypeStrong acid cation resin – softening, food grade quality
Life Span15 years under normal operating conditions



Ion exchange
Litres of Resin1530506075100125175
Softener Capacity
as CaCO³
Salt Conskg/reg1.



Flow Rate
Litres of Resin 1530506075100125175
 nominal m³/hr0.
minimum metered 300 Litres/Hour



StartFully programmable
ManualManual operation as required
Time Clock Version (STE0)7 Day
Volume Delayed or Immediate (AT0)Volume
 Time / Volume



Regeneration water usage
Litres of Resin 1530506075100125175
1) BackwashLitres214894128128195195226
2) Brining + Slow RinseLitres4083131158197252285471
3) Fast RinseLitres376494128128195243283

Siata 132 Service Kit

Siata V132 Service Kit
Piston Service Kit£58.54


Siata 132 Manual

Adobe PDF

1 Year Warranty


There are no reviews yet.

Be the first to review “Siata Simplex 132 Water... ”

What is a Simplex Water Softener?

A simplex water softener consists of one vessel containing ion exchange resin. Once the iron exchange resins are exhausted, the water softener will go into the regeneration sequence. During the regeneration sequence that takes about two hours, there will be no water passed through the softener to service. If the water softener is time controlled, it is possible to set the regeneration time to 3am when there is usually no requirement for water. If the water softener is a water meter controlled unit, it is more difficult to gage what time the water softener will regenerate. If a continuous supply of softened water is required, it is advisable to install a duplex water softener.

What is a Duplex Water Softener?

A duplex water softener consists of two vessels containing ion exchange resin, once the first column of resin has exhausted and goes into regeneration, the second column goes into service. This maintains soft water to service at all times. Duplex water softeners are usually water meter controlled but in some cases, duplex water softeners can be time clock controlled.