Product Information
Purolite® MB400 Mixed Bed Exchange Resin Purolite MB400 is a high quality resin mixture for direct purification of water. It is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units. Passage of water at recommended flow rates through the resin as supplied can achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 µs cm-1 for a major portion of the service run which may be extended depending upon the final water quality acceptable. Equivalent volumes of ultra pure water may be obtained after regeneration but only if sufficient regenerant quantities are employed to achieve the percentage conversion levels equivalent to those of the "as supplied" resin. Generally acceptable capacity and quality is obtained economically at lower regeneration. BASIC FEATURES: Application - Used in a wide range of water conditions Polymer Structure - Gel polystyrene crosslinked with divinylbenzene Appearance - Spherical beads Functional Group - Sulphonic Acid and Type 1 Quaternary Ammonium Ionic Form as Shipped - H+ / OH- PRODUCT INFORMATION Anion Cation Cation / Anion Ratio 60% 40% Component Gel Strong Base Anion Gel Strong Acid Cation Mean Size Typical 0.60-0.85 mm Moisture Content (max.) 65 % Total Capacity, (min.) 1.3 eq/ (28.4 kGr/ft3) 1.9 eq/l (41.5 kGr/ft3) Uniformity Coefficient (max.) 1.7 Shipping Weight (approx.) 705-740 g/l (44.1-46.3 lbs/ft3) Temp Limit, Non-Regenerable Bed 100 °C (212 °F) Temp Limit, Regenerable Bed 60 °C (140 °F) MSDS
Mixed Bed Exchange Resin
Purolite MB400 is a high quality resin mixture for direct purification of water. It is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units. Passage of water at recommended flow rates through the resin as supplied can achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 µs cm-1 for a major portion of the service run which may be extended depending upon the final water quality acceptable. Equivalent volumes of ultra pure water may be obtained after regeneration but only if sufficient regenerant quantities are employed to achieve the percentage conversion levels equivalent to those of the "as supplied" resin. Generally acceptable capacity and quality is obtained economically at lower regeneration.
BASIC FEATURES:
Application - Used in a wide range of water conditions Polymer Structure - Gel polystyrene crosslinked with divinylbenzene Appearance - Spherical beads Functional Group - Sulphonic Acid and Type 1 Quaternary Ammonium Ionic Form as Shipped - H+ / OH-
PRODUCT INFORMATION
Anion Cation Cation / Anion Ratio 60% 40% Component Gel Strong Base Anion Gel Strong Acid Cation Mean Size Typical 0.60-0.85 mm Moisture Content (max.) 65 % Total Capacity, (min.) 1.3 eq/ (28.4 kGr/ft3) 1.9 eq/l (41.5 kGr/ft3) Uniformity Coefficient (max.) 1.7 Shipping Weight (approx.) 705-740 g/l (44.1-46.3 lbs/ft3) Temp Limit, Non-Regenerable Bed 100 °C (212 °F) Temp Limit, Regenerable Bed 60 °C (140 °F)
MSDS
Be the first to review this product!
Price: £0.00
