| Depth Filtration Cartridge Water Filters |
Polyspun Cartridge Filters |
 Low cost filtration shouldn't
mean reduced quality, therefore the Polyspun
filter offers economic pricing with Pentek
brand quality and the safeguards associated
with a £6bn organisation. Available
in industry standard micron sizes and lengths,
the polyspun is ideal for applications which
require the process of large volumes of
product, and frequent cartridge change-outs.
The possible application avenues open to
the polyspun are further enhanced by the
recent inclusion of optional end cap configurations,
which help to reduce any possible bypass
thus improving the filtered product quality.
Click
Here for the Polyspun Range |
Spun Bonded Cartridge Filters |
 A range of four true-depth filter products
form the recognised leader in spun bonded
cartridge filtration, GE Osmonics. These
cartridges are of pure-polypropylene construction,
using FDA approved materials, which meet
NSF standard 42 with the manufacturing process
being ISO 9000 certified. More importantly
in the UK, GE Osmonics Spun Bonded are WRAS
listed.
The patented one-step manufacturing process
employed by GE Osmonics continually extrudes
and thermally bonds pure polypropylene microfibres
into a complex filter matrix. Micro-filaments
plus precise control maximise the positive
filtration characteristics of graded density,
tight micron cut offs and maximum void area
with millions of tortuous paths. This manufacturing
process assures consistent quality, filter
to filter year in and year out .
True Depth Filtration
Many cartridges claim to be depth filters
but to be a true depth filter a cartridge
must be able to retain contaminants throughout
the entire cross section of the filter.
The complete GE Osmonics Spun-Bonded range
are true depth filters, hence higher dirt
holding capacity, resulting in improved
life.
Click
here for our Spun Bonded Product Range |
Wound Cartridge Filters |
 Basic technology that works.
Wound filter cartridges have been successfully
used in industry for decades, with little
change in the method of manufacture, and
are an effective matrix for trapping particulate
within the media.
Manufactured by Pentair AFL
in Cleveland, UK who maximise modern production
techniques and are unique in this country,
being the only plant today to control the
manufacture from raw polypropylene extract
through to the computer controlled winding.
Available in 3 medias and
a wide span of micron ratings, wound filter
cartridges offer cost effective particulate
filtration with a history to prove it.
Click
Here for the Wound Product Range
|
Resin-bonded Probond™ Cartridge Filters |
 With the majority of inexpensive
filter cartridges containing polypropylene,
the filtration of many fluids is not feasible;
hence the development of this resin-bonded
cartridge. ProBond cartridges have a unique
proprietary two-stage filtration design
to maximise particle removal and service
life in viscous and or high temperature
fluid filtration applications. The one-piece
construction with outer spiral pre filter
wrap increases cartridge strength for use
with fluid viscosities up to 15,000 SUS
(3200 cks) and eliminates residual debris
associated with conventional, machined,
resin-bonded cartridges. Probond's construction
allows cartridges to withstand pressure
surges up to 10 bar across the cartridge
(depending on fluid temperature). Applications
are numerous in high-viscosity situations
with silicone-free manufacture, ensuring
no contamination is introduced to adversely
affect adhesion properties of coatings.
Click
Here for the Resin Bonded Product Range
|
Z.Plex™ Filters Cartridge Filters |
 Produced by GE Osmonics ,
an innovator in depth filtration, Z.Plex
Technology combines a unique mix of design
and manufacturing process, to create a product
with performance characteristics unlike
any other melt blown depth filter. Created
to respond to industry demands for quality
and productivity, Z.Plex offers advancements
for depth filtration in thee key areas;
Increased dirt holding
capacity - The integration of transverse
Z-Fibres that run through the filter from
core to outer surface layer, allow for greater
void volume whilst maintaining the filters
structural integrity. Results have shown
this patented process up to 100% greater
dirt-loading capabilities.
Improved filter life - Manufactured to incorporate smaller diameter
fibres, increased layer spacing, and an
innovative 3-dimentional fibre matrix provides
up to 100% longer life. Longer service life
results in reduced labour (less changes/outs
downtime), disposal, and inventory costs.
Longer life also has significant environmental
benefits by creating less waste in terms
of reduced numbers of used filters.
Reduced pressure drops - Z.Plex filters have up to half the
pressure drop associated with rival depth
filters. This means fast flow rates and
quicker batch processing are possible, leading
to lower energy and production costs.
Click
Here for Z.Plex™ Product Range
|
|
 |
Industrial Water Equipment Ltd
4 Causeway Lane, Matlock
Derbyshire, DE4 3AR
TEL: +44 (0)1629 55839
FAX: +44 (0)1629 501055
2nd Floor, 13 Upper Baggot Street, Dublin
4, Ireland
TEL: + 00 353 14428670
info@industrialwaterequipment.co.uk
24Hr
Helpline - Emergency
Number : 07775 661688 |
| Quick
Shop | Sitemap | Terms
& Conditions of Sale | Returned
Goods Policy | Payment
Option| Account Application
|
|
Water treatment related videos - view the latest information online.
IWE Guarantee to beat any like for like quote for water treatment and parts by 10% and any like for like service / maintenance contract by 20%