Purolite® MB600LT

Mixed Bed Exchange Resin - Light Cation

Purolite MB600LT is a special high quality resin mixture of a light gel strong acid cation resin and a high capacity gel type I strong base anion resin for direct purification of water. It is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units. Passage of water at recommended flow rates through the resin as supplied can achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 µS/cm for a major portion of the service run which may be extended depending upon the final water quality acceptable. The selection of a high capacity type I strong base anion resin ensures that Purolite MB-600LT has an excellent operating capacity. Equivalent volumes of purified water may be obtained after regeneration but only if sufficient regenerant quantities are employed to achieve the percentage conversion levels equivalent to those of the "as supplied" resin. Generally acceptable capacity and quality is obtained economically at lower regeneration levels.

BASIC FEATURES:

Application - High Capacity - very high conversion rate mixed bed with macroporous anion - light color cation
Polymer Structure - Gel polystyrene crosslinked with divinylbenzene
Appearance - Spherical beads
Functional Group - Sulphonic Acid and Type 1 Quaternary Ammonium
Ionic Form as Shipped - H+ / OH-

PRODUCT INFORMATION

Anion Cation
Cation / Anion Ratio 60% 40%
Component Gel Strong Base Anion Gel Strong Acid Cation
Total Capacity, (min.) 1.4 eq/l (30.6 kGr/ft3) 1.9 eq/l (41.5 kGr/ft3)
Shipping Weight (approx.) 715-750 g/l (44.7-46.9 lbs/ft3)
Temp Limit, Non-Regenerable Bed 100 °C (212 °F)
Temp Limit, Regenerable Bed 60 °C (140 °F)
Mean Size Typical 0.60-0.85 mm
Uniformity Coefficient (max.) 1.7
Moisture Content (max.) 65 %

MSDS