|
Purolite® MB600
Mixed Bed Exchange Resin
Purolite MB600 is a high quality resin
mixture for direct purification of water.
It is suitable for use in regenerable and
non-regenerable cartridges and in large
ion exchange units. Passage of water at
recommended flow rates through the resin,
as supplied, can achieve almost complete
reduction of total dissolved solids. The
residuals produce average conductivity values
of about 0.1 µS/cm for a major portion
of the service run, which may be extended
depending on the final water quality acceptable.
Equivalent volumes of pure demineralised
water may be obtained after regeneration
if sufficient regenerant quantities are
employed to achieve the percentage conversion
levels similar to those of the “as
supplied” resin. Exposure of the mixture
to the atmosphere for lengthy periods can
result in some loss in hydroxide sites of
the anion component by conversion to carbonate
from carbon dioxide in the atmosphere. This
can give rise to loss of treated water quality.
BASIC FEATURES:
Application - High Capacity - very high
conversion rate mixed bed with macroporous
anion
Polymer Structure - Gel polystyrene crosslinked
with divinylbenzene
Appearance - Spherical beads
Functional Group - Sulphonic Acid and Type
1 Quaternary Ammonium
Ionic Form as Shipped - H+ / OH-
PRODUCT INFORMATION
Anion Cation
Cation / Anion Ratio 60% 40%
Component Gel Strong Base Anion Gel Strong
Acid Cation
Total Capacity, (min.) 1.4 eq/l (30.6 kGr/ft3)
1.9 eq/l (41.5 kGr/ft3)
Shipping Weight (approx.) 715-750 g/l (44.7-46.9
lbs/ft3)
Temp Limit, Non-Regenerable Bed 100 °C
(212 °F)
Temp Limit, Regenerable Bed 60 °C (140
°F)
Mean Size Typical 0.60-0.85 mm
Uniformity Coefficient (max.) 1.7
Moisture Content (max.) 65 %
MSDS
|
